The Contractor must furnish to the Chicago Department of Aviation (CDA) Dry Heated Sand and related supplies, which CDA will arrange to pick up for a (5) Five Year Contract.  Learn More »

Anchor Base Aluminum Poles, Mast Arms, Transformer Bases, Aluminum Disconnects, Mounting Hardware and Related Equipment (MATERIALS ONLY) for a (5) Five Year Contract  Learn More »

This Contractor will provide equipment without operators on rental basis, and provide operators, laborers and supplies on an "as needed" basis to perform airport maintenance for the Department at Chicago O'Hare and Midway international Airports (individually, the "Airport" and collectively the "Airports"). Contractor will deliver equipment to the Work Site at the time and place designated by the Department. The Contractor will also provide herbicides, including certified applicator when directed by the Commissioner. Airport Maintenance includes (but is not limited to): maintenance of gravel, turf areas for grade, drainage, vegetative cover, compaction and the general overall condition of the airfields and the surrounding Landside areas at the airports for a (5) Five Year Contract.   Learn More »

This contract consists of furnishing all labor, equipment, incidentals, materials and supervision required to perform Safety Glass Replacement Services at various locations at Chicago O'Hare and Midway International Airports, for a (5) Five Year Contract  Learn More »

This contract includes the furnishing of all labor, equipment, materials, tools and service required for the installation of the various insulation for piping, valves, pumps, converters, tanks, boiler breeching, diesel exhaust stacks, drain lines and ductwork for a (5) Five Year Contract  Learn More »

The Contractor shall provide all equipment, fuel, labor, management, materials transportation and any/all other services necessary to inspect the CDA's conveyance devices as specified with the terms and condition of this specification. for a (5) Five Year Contract   Learn More »

The project is located at Midway International Airport, and it includes installing new Airfield Lighting Control System (ALCS) Equipment in existing Airfield Lighting Control Vault (ALCV) at Midway International Airport, Air Traffic Control Tower (ATCT), and Airport Maintenance Complex (AMC); installing new airfield lighting constant current regulator switchgear in ALCV; upgrading existing power distribution switchgear with new human-machine interface in ALCV; constructing an air conditioned equipment room in the ALCV; installing lightning protection system for the ALCV; installing a new generator in the ALCV, removing the existing generator, sending it to the manufacturer for retrofit, and re-installing on airfield at location to be determined by Commissioner; installing a new generator outside ID Badging building and removing and disposing existing generator off-site; investigating existing airfield lighting structures within the airfield; removing existing power cable and installing new power cable and replacing transformers for Runway 4R-22L edge lighting circuits.  Learn More »

Purchase of Automated External Defibrillators (AED) and Associated Support Materials. Five (5) year blanket contract.  Learn More »

The Chicago Department of Aviation (CDA) is seeking proposals for information and/or demonstration of sustainable technologies that may improve the economic and environmental performance of its facilities at Chicago O'Hare International Airport and Chicago Midway International Airport  Learn More »

The scope of work includes developing, designing, constructing, operating and maintaining a public access Multi-Alternative Fuel Vehicle Service Station. The Station would offer compressed natural gas (CNG) and would allow for a variety of additional alternative fuels. This facility is intended to serve passenger vehicle fueling needs of the Airport, Airport tenants, other Airport-associated customers and businesses, and the general public.   Learn More »

The project is located at Midway International Airport, and it includes the pavement rehabilitation of Taxiway Y and Taxiway K with some additional work scope located on Taxiway D and the exit Taxiways Y1, Y2. The scope of work also includes the enhancements to the South Ramp area. Other items include drainage modifications and all electrical lighting work for the full length of Taxiway Y and K including homerun cabling to the airfield lighting control vault.  Learn More »

The CDA requires a firm to provide in-house support for a wide variety of sustainability planning and implementation activities, and will support the CDA in advancing its Airport Sustainability Advancement Program ("ASAP") for O'Hare (ORD) and Midway (MDW) International Airports.  Learn More »

The FAA has granted Chicago the opportunity to look at ways to use the value created by Midway Airport to help fund infrastructure needs elsewhere in the City. There is only one large hub airport in United States that FAA will permit to do this and the City of Chicago is first in line to explore it. Please copy url address into new tab: http://www.cityofchicago.org/city/en/depts/fin/supp_info/midway_transaction.html  Learn More »

This is a five year contract to provide Labor, Replacement Parts, Components and Accessories for the Installation, Repair and Replacement of Various Lighting, Electrical Systems, Traffic Signals and Security Systems Infrastructures at O'Hare and Midway International Airports   Learn More »

Sound insulation of 1000 homes in the vicinity of Chicago O'Hare International Airport in five packages ranging from 250 to 25 homes. Bid Opening Date: Specification No's. 113520, 113532, 113550- Thursday, January 31, 2013, 11:00 AM. Specification No's. 113554, 113556- Friday, February 2, 2013, 11:00 AM   Learn More »

This is a five year contract to provide materials and/or labor for new installation and repair or replacement of existing noise abatement fence for Chicago Airports. The work will primarily take place at Midway International Airport.   Learn More »